DynaVap OMini launched: a compact titanium VapCap with a heat-recycling Regenerator

DynaVap has launched the OMini (pronounced “ah-MIN-ee”), a new battery-free dry herb vaporizer that the American maker calls its most compact titanium UniBody build yet. The OMini went live on DynaVap’s official store on 10 November 2026 at US$119, and UK specialist retailers began listing it from 11 November. It’s not just a shortened VapCap, though. The headline feature is something DynaVap has never done before: a Regenerator that recycles heat from the vapour to warm the incoming air.

Here’s what the OMini is, how the Regenerator is meant to work, and whether it’s worth a look if you already own an M 7 or another DynaVap.

DynaVap OMini compact titanium vaporizer with polished Captive Cap

What is the DynaVap OMini?

The OMini is a pocket-sized thermal extraction device in the same family as the M 7, the HyperDyn and the WoodWynd. There’s no battery and no screen. You heat the Captive Cap with a torch lighter or a compatible DynaVap induction heater until it clicks, then draw. DynaVap’s pitch is aimed at experienced users: people who have “dialled in their session down to the click” and don’t want to lose airflow control, hit size or time at extraction temperature just because they’ve picked a smaller device.

According to DynaVap’s official product page, the key specifications are:

  1. Materials: Grade 2 titanium UniBody and condenser, made in the USA, with a 316L stainless steel mouthpiece for balance in the hand.
  2. Bowl size: 0.1 g, with full chamber depth and half-bowl positioning.
  3. Airflow: a variable airport at the mouthpiece/body joint. You rotate the mouthpiece against the UniBody to set the air-to-vapour ratio.
  4. Body: a new multi-fin compact UniBody with a DuraDyn finish, inspired by the Electrum Omni.
  5. Heating: works with a flame or DynaVap induction heaters.
  6. In the box: the OMini, a DynaVap tin case with silicone insert and a Pink Slip cleaning tab. The parts list includes a Captive Cap, the OMini UniBody (tip and midsection), a titanium CCD (Style #1), the condenser assembly with mouthpiece and two O-rings.

Don’t confuse the OMini with the older Omni tip. The DuraDyn finish nods to the Electrum Omni, but the OMini is a separate, complete device with its own body and condenser.

The Regenerator: recycling heat instead of wasting it

Most small vaporizers have a basic problem. Less metal means less stored heat, so the chamber cools quickly and the extraction window is short. DynaVap’s answer is the Regenerator, which it describes as its longest continuous incoming airflow path. Put simply, cool incoming air is warmed by the hot outgoing vapour, and that same vapour is cooled before it reaches you.

DynaVap says this happens along four routes at once:

  1. The SPLITS. Air enters through nine laser-cut slots (DynaVap calls them “Superfine Precision Laser Incised Thermal Separations”). They form a thermal break that picks up heat that would otherwise creep towards your fingers and sends it back into the airflow.
  2. The condenser. As it travels, the incoming air takes on excess heat conducted from the vapour inside the machined condenser.
  3. The multi-fin UniBody. The airflow picks up heat conducted away from the chamber, then exits through three holes just under the cap.
  4. Around the chamber. Leaving the Regenerator, the air wraps around the outside of the chamber, keeping it warm for longer than a device this small and light normally could.

By the time the air reaches the herb, it has already been preheated. DynaVap claims the result is a faster heat-up, longer and more even extraction from less mass, and smoother vapour. A separate machined space in the mouthpiece is fed with cool air from the airport to keep the draw comfortable.

These are DynaVap’s claims, and independent long-term reviews aren’t out yet. The idea itself is a familiar one, though: a small heat exchanger that reuses energy a tiny device would normally lose.

DynaVap OMini shown with its DynaVap tin case

How DynaVap says to use it

The routine will be familiar to any VapCap owner, with one important change in technique:

  1. Dial it. Rotate the mouthpiece to set how much fresh air mixes with the vapour.
  2. Heat it. Warm the chamber and cap until you hear the click.
  3. Draw long and slow. DynaVap stresses this. A slow pull gives the Regenerator time to capture and reuse heat, so you get more from each heat cycle.

If you’re used to short, hard pulls, expect to adjust. If you’re still working out how many heat cycles suit you, our earlier guide to DynaVap heat cycles and the missing click still applies.

How the OMini fits the DynaVap range

DynaVap describes the 45 mm UniBody as doubling up as a midsection when it’s paired with another DynaVap tip, so it slots into the brand’s modular system rather than standing apart from it.

For most people the choice looks like this:

  1. OMini: the smallest, most engineered option, aimed at experienced users who want compact size without giving up airflow control.
  2. DynaVap M 7: the everyday benchmark, with the classic stainless build and an easy learning curve.
  3. DynaVap M 7 XL: a longer body for more cooling and a little more distance from the heat.
  4. HyperDyn and WoodWynd: premium builds for owners who want a different feel or finish.

DynaVap M 7 vaporizer available at Vapetrix

If you already own an M 7 and it does what you need, the OMini isn’t an essential upgrade. It’s a second device for pockets and travel, or a showcase for DynaVap’s newest thermal design. If you’re new to battery-free vaping, the M 7 is still the simpler place to start. You can browse every option in our dry herb vaporizers collection.

Accessories and compatibility: check before you buy

Because the OMini has its own condenser assembly and stainless mouthpiece, don’t assume every third-party stem or mouthpiece designed for standard DynaVap tips will fit or perform the same way. DynaVap hasn’t published a compatibility list for aftermarket stems. Until it does, treat stems and adapters as a check-first purchase.

Consumables are more straightforward. CCD screens wear out on every DynaVap over time, so it’s worth keeping spares in the tin. Our CCD screen packs for DynaVap tips and titanium CCD screens are made for standard DynaVap tips. The full range of glass stems, cooling stems, bubblers and parts for the M 7 family is in our DynaVap stems, parts and accessories collection.

Stainless steel CCD screens for DynaVap tips

The bottom line

The OMini is DynaVap’s most interesting launch in some time. Rather than simply shrinking a VapCap, it adds a genuinely new piece of thermal engineering to a tiny titanium body. The Regenerator should make a small, light device behave more like a larger one, as long as you draw slowly. Real-world reports over the coming weeks will show how well that holds up.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

Best picks for you

Hand-picked accessories that go with this article.

View all →