The everyday size
Cut to the CCD seat used across DynaVap tips, so it presses in flat.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Cheap to keep spares
Packs run from 5 to 20, so a blocked screen never ends a session.
Swap, don't scrub
A fresh screen is quicker than fighting residue out of an old one.
Let the tip cool
Never push a screen into a hot tip.
Remove the old screen
Tip it out, or ease it out with the condenser.
Press the new one in
Set it flat in the seat and press it level. It does not need bending.
Check the draw
If the draw feels tight or uneven, the screen may be tilted. Press it level again.
What's in the box
- CCD screens, in the pack size you choose
A DynaVap tip and device are not included. Choose your pack size before adding to basket.
| Material | Stainless steel |
|---|---|
| Diameter | 8mm |
| Thickness | 0.1mm |
| Packs | 5, 10 or 20 |
| Made by | The Vapetrix (not an official DynaVap part) |
The Steel CCD Screens are made for:
DynaVap M series
- M 7 tip
- M 7 XL tip
- Earlier M tips
They go inside the tip, not in a stem. See all our stems and accessories for DynaVap tips and our guide to DynaVap screen replacements.
| Screen | Price | Rating | Material | Diameter | Where it goes | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing Steel CCD Screens |
£9.99 | – | Stainless steel | 8mm | Inside the tip | 5, 10 or 20 | Everyday replacements |
 Titanium CCD Screens |
£7.99 | ★ 5.0 (1) | Titanium alloy | About 8mm | Inside the tip | 3, 5 or 10 | A lighter, tougher screen |
See all our stems and accessories for DynaVap tips.
-
Review of Domed Screens for Arizer Solo 3
★★★★★Matthew DombroskiVerified buyerLove these
Love these. They are the only dome ones I could find.
-
Review of Screen Caps for Arizer XQ2
★★★★★Michael MorrowVerified buyerSo handy to have extras
So handy to have extras of these
-
Review of Domed Screens for Arizer Solo 3
★★★★★AnonymousVerified buyerThese are great
These are great, they stay put and airflow is good too!
-
Review of Domed Screens for Arizer Solo 3
★★★★★Damian GasiorVerified buyerBetter airflow and evenly toasted material
Better airflow and evenly toasted material.
-
Review of Screen Caps for Arizer XQ2
★★★★★Justin ColbyVerified buyerThanks Vapetrix
Thanks Vapetrix.You guys provide quality products for a low price! Glad i found you
-
Review of Coarse Screens for S&B Portables
★★★★★rastaman77top quality
fit my mighty without issue, easy swap.
-
Review of Coarse Screens for S&B Portables
★★★★★Matt L.Recommended
Swapped these into my Crafty+ and noticed way better airflow, definitely worth keeping a few packs on hand so you’re never stuck.
-
Review of Coarse Screens for S&B Portables
★★★★★Jade M.Solid Pack
Better airflow compared to worn screens.
-
Review of Screen Set for VENTY
★★★★★PaulaAll types included
like that it has both round and rectangle.
-
Review of Screen Set for VENTY
★★★★★PAUL AH!All types included
like that it has both round and rectangle.
-
Review of Screen Caps for Arizer XQ2
★★★★★George ThornePerfect fit
Good quality, fits the EQ2 perfectly
-
Review of Screen Set for VENTY
★★★★★Zacdoes the job
basic but necessary, nothing more to say.
Do they fit other devices?
No. They are cut for the CCD seat in a DynaVap tip.
How do I clean a screen?
Soak it in isopropyl alcohol, rinse with warm water and let it dry fully. Replace it when the mesh stays blocked after a soak.
Is this an official DynaVap part?
No. The Steel CCD Screens is made by The Vapetrix to fit DynaVap tips. It isn't made or sold by DynaVap.
Which pack should I buy?
5 for a first spare set, 10 for regular swapping, 20 if you share a device or lose them. The price per screen drops as the pack gets bigger.
How do I replace a DynaVap screen, and how often?
Let the tip cool, tip the old screen out and press the new one in flat. No bending is needed. Replace it when the airflow stays restricted after a soak in isopropyl alcohol. Our CCD maintenance guide shows each step.
Complete your setup
Often bought with DynaVap parts in real orders, plus the screens and water options made for the same tips.
