One adapter, three joints
Ground for 10mm, 14mm and 18mm, so it covers the common water pipe sizes.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Use the glass you own
Your tip goes in one end and your water pipe takes the other.
A spare included
Two adapters, because a small glass piece is easy to mislay.
Match the joint
Pick the ground section that fits your water pipe: 10mm, 14mm or 18mm.
Seat your tip
Press your cooled DynaVap tip into the adapter.
Add water to your pipe
Fill your own water pipe as you normally would, not this adapter.
Heat, then draw
Heat the cap until it clicks, then draw through the water pipe.
What's in the box
- 2 x all-in-one glass WPA adapters, 5cm
A DynaVap tip, device and water pipe are not included. The adapter itself holds no water.
| Material | Glass |
|---|---|
| Joints | 10mm, 14mm and 18mm, male |
| Length | 5cm |
| Weight | 50g for the pair |
| Pack | 2 adapters |
| Made by | The Vapetrix (not an official DynaVap part) |
The Multi-Fit WPA is made for:
DynaVap M series
- M 7
- M 7 XL
- Earlier M tips
Not for
- The UniDyn (its tip and stem are one piece)
Your water pipe
- 10mm female joint
- 14mm female joint
- 18mm female joint
It connects a DynaVap tip to your own water pipe. If you want the water piece included, see the Water Bubbler. Our guide to DynaVap water pipe adapters shows the setups.
| Adapter | Price | Rating | Cooling | Joint | Length | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing Multi-Fit WPA |
£14.99 | ★ 5.0 (1) | Your own water pipe | 10mm, 14mm and 18mm (male) | 5cm | 2 | Using the water pipe you already have |
 Water Bubbler |
£14.99 | – | Water, mini chamber | Takes a DynaVap tip | About 15cm long | 1 | The coolest draws |
See all our stems and accessories for DynaVap tips.
-
★★★★★Cristian PangaVerified buyer
Just awesome
Just awesome, fast shipping , nice stuff, 😁
Showing 1 reviews
Will it fit my water pipe?
If your water pipe has a 10mm, 14mm or 18mm female joint, yes. Match the ground section to that joint.
Does the adapter hold water?
No. The water goes in your water pipe. For a piece that holds its own water, see the Water Bubbler.
How do I clean it?
Soak it in isopropyl alcohol, then rinse thoroughly with warm water and let it dry fully before use. See our guide to cleaning DynaVap glass.
Is this an official DynaVap part?
No. The Multi-Fit WPA is made by The Vapetrix to fit DynaVap tips. It isn't made or sold by DynaVap.
Complete your setup
Often bought with DynaVap parts in real orders, plus the screens and water options made for the same tips.
