Small loads, focused heat
The in-set screen creates a small chamber, so heat flows through a smaller amount.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Load the elbow itself
Pack a small amount directly into the elbow instead of filling the whole bowl.
Screen built in
No separate metal dome screen to buy, lose or replace.
Leave the bowl empty
With the Microdose elbow, the load goes in the elbow itself, not the bowl.
Load the elbow
Pack a small amount into the male end, up to the in-set glass screen, then push it into the bowl.
Connect your whip
Push your silicone whip onto the ridged glass end.
Clean
Soak in isopropyl alcohol, rinse with warm water and dry fully. No metal screen to remove.
What's in the box
- 2 x Microdose glass elbow adapters with built-in glass screen
Bowls, whips and your Arizer device are not included.
| Material | Glass |
|---|---|
| Dimensions | About 55 x 50mm |
| Diameter | About 20mm |
| Screen position | About 10mm inside the elbow |
| Screen | Built-in glass screen |
| Pack | 2 elbows |
The Microdose elbow is made for the Arizer desktop units:
Arizer desktop units
- Extreme Q
- XQ2
- V-Tower
Not for Arizer portables (Solo, Air or ArGo). See all our XQ2, Extreme Q and V-Tower parts.
| Elbow | Price | Rating | Shape | Screen | Size | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing Microdose Elbow |
£14.99 | ★ 5.0 (1) | Compact, screen set 10mm inside | Built-in glass screen | About 55 x 50mm | 2 | Small loads in the elbow |
 Elbow 2-pack |
£8.99 | ★ 4.8 (19) | Standard elbow | None built in | 55 x 50mm | 2 | Everyday whip use, with a spare |
 Elbow 5-pack |
£14.99 | ★ 5.0 (2) | Standard elbow | None built in | 55 x 50mm | 5 | The best-value spares |
 Comfort Curve |
£14.99 | ★ 5.0 (1) | Long swept curve | Built-in glass screen | About 55 x 50mm | 2 | A gentler whip angle |
 Dual-Whip Elbow |
£14.99 | – | Two whip outlets | Built-in glass screen | About 8 x 5 x 2cm | 2 | Two people, one unit |
-
★★★★★AnonymousVerified buyer
Works great
Works great, a good quality piece
Showing 1 reviews
What makes it a microdose elbow?
The glass screen sits about 10mm inside the elbow, which makes a small loading area. You load a small amount into the elbow instead of filling the bowl.
Can I put material straight into the elbow?
Yes. That's what it's made for: the in-set screen holds a small load inside the elbow.
Do I still need metal dome screens?
No. The glass screen is built in, so separate metal dome screens aren't needed for normal use.
Does the Microdose elbow work with the Extreme Q and V-Tower?
Yes. It's made for the Arizer Extreme Q, XQ2 and V-Tower.
How do I clean it?
Soak the glass in isopropyl alcohol, then rinse thoroughly with warm water and let it dry fully before use. See how to clean and maintain your XQ2.
Is the Microdose elbow an official Arizer product?
No. It's designed and sold by The Vapetrix and made for Arizer devices.
Complete your setup
Picked from real orders: these are the items customers most often buy with the Microdose Elbow.
-
Often bought togetherGlass Connoisseur Bowl for the Arizer XQ2, Extreme Q (Cyclone Bowl with Glass Screen) Pack of 2£14.99
-
Often bought togetherPick Tool and Tamper, Shovel Set for DHVs - Arizer Solo 3, Mighty, Venty, LimeLight Frolic, Dynavap, TinyMight 2£4.99Sold out
