Double barrel
Two internal glass water chambers instead of one, so vapour travels further.
Skip to content
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Two internal glass water chambers instead of one, so vapour travels further.
The biggest of our Mighty and Crafty bubblers at 190 x 140 mm.
It plugs into the cooling unit with the gaskets supplied.
Two chambers means a little water goes a long way. Overfilling causes splash.

Push a silicone gasket onto the glass connector.

Cover the holes where the vapour enters. Overfilling causes splash.

Remove the mouthpiece and push the bubbler into the cooling unit.

Empty after use and rinse. Soak in isopropyl alcohol now and then.
The silicone gasket fit is not as locked-in as the stock mouthpiece, so it can take a little time to get used to.
| Material | Borosilicate glass |
|---|---|
| Length | 190 mm |
| Width | 140 mm |
| Weight | 100 g |
| Design | Two internal water chambers |
| Fit | Silicone gasket into the cooling unit |
| Made by | The Vapetrix, third party |
Made for the cooling unit shared by the Mighty, Mighty+, Crafty and Crafty+.
The silicone gasket fit is not as locked-in as the stock mouthpiece, so it can take a little time to get used to. Not for the Venty or Veazy. The Venty has its own Typhoon.
| Bubbler | Price | Rating | Design | Cooling stages | Size | Weight | Best for |
|---|---|---|---|---|---|---|---|
You're viewing Typhoon |
£39.99 | – | Double barrel | Two water chambers | 190 x 140 mm | 100 g | The longest vapour path |
Cascade |
£14.99 | ★ 4.6 (16) | Side chamber | Water | 170 x 120 mm | 100 g | Everyday water cooling |
Steel Stream XL |
£34.99 | ★ 5.0 (1) | XL side chamber | Steel beads, then water | 170 x 120 mm | 150 g | Two-stage cooling |
All three are side bubblers for Mighty and Crafty cooling units. They do not fit the Venty or Veazy.
Review of Mighty Cascade Bubbler
a great bubbler gos weel with my mighty+
Review of Mighty Short Mouthpiece, 3-pack
The mouthpiece fits perfect for mighty vaporizer.
Review of Mighty Short Mouthpiece, 3-pack
This is a great upgrade – much nicer taste than the stock plastic mouthpiece. The silicone gaskets hold it in place pretty well, though not quite as tight as the original.
Review of Mighty Cascade Bubbler
If you got a Mighty this is a must, simple as that
Review of Mighty Vortex Mouthpiece
huge upgrade over the plastic tip, worth every penny
Review of Mighty Dimpled Mouthpiece
better flavor and way cooler vapor, happy with it.
Review of Mighty Cascade Bubbler
Mighty was already solid but with this bubbler it’s next level
Review of Mighty Vortex Mouthpiece
noticeable difference in flavor, much less harsh on the throat.
Review of Mighty Vortex Mouthpiece
the twisted glass looks awesome and feels premium. great upgrade.
Review of Mighty Dimpled Mouthpiece
nice design, feels premium compared to plastic.
Review of Mighty Short Mouthpiece, 3-pack
Really like these short glass mouthpieces – the flavor is so much cleaner compared to plastic. Fit is a bit looser than stock but works ok with the gaskets.
Review of Mighty Dimpled Mouthpiece
The dimples actually do make the vapor smoother.
Yes. It fits the Mighty, Mighty+, Crafty and Crafty+, which share the same cooling unit. It does not fit the Venty or Veazy.
Add a small amount of water, just enough to cover the holes where the vapour enters. Draw slowly at first: a fast pull can lift water to your lips.
Two chambers give the vapour a longer path through water. The Cascade is smaller and quicker to clean.
Empty both after use, rinse with warm water and soak in isopropyl alcohol now and then. Let it dry fully.
Yes, it is the largest in the range. It changes the balance of the device, so it feels different in the hand at first. Keep it upright with water inside and do not stand it on a table.