More water, cooler draws
A bigger water volume cools and filters more, for a fuller, smoother draw.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Stays dry for heavy pulls
The splash-control lid keeps water out of your mouth, even on harder draws.
Easy to fill and clean
Lift the lid to fill, empty and rinse.
Add a little water
Lift the lid and add water to just above the bubble holes. Don't overfill.
Fit it to your device
Pull your current glass stem straight up and out of the top of your LOBO or ONE, then push the bubbler straight down into the same opening until it sits snugly. No twisting needed.
Heat and draw gently
Keep the device upright and draw slowly so the water bubbles without splashing.
Empty and rinse
Take it off the device before you empty it. Rinse with warm water, and soak in isopropyl alcohol now and then.
What's in the box
- 1 x Extra Large water bubbler with removable lid
Your POTV device is not included.
| Material | Borosilicate glass |
|---|---|
| Length | 150mm |
| Diameter | 35mm |
| Weight | 80g |
| Lid | Removable, splash control |
Made for the Planet of the Vapes Lobo and ONE, and also listed for the POTV XMAX V3 Pro:
Planet of the Vapes (POTV)
- Lobo
- ONE
- POTV XMAX V3 Pro (fitted with its POTV Accessory Attachment)
The POTV XMAX V3 Pro takes POTV glass through its POTV Accessory Attachment. Using a standard XMAX V3 Pro or V4 Pro? See our XMAX V3 Pro and V4 Pro accessories, which need the black base.
If your device is not listed, bear in mind the 12 mm diameter connection when considering fit.
| Water option | Price | Rating | How it connects | Water | Size | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing XL Bubbler |
£19.99 | ★ 5.0 (1) | Fits like a stem | Largest, built in | 150 x 35mm | 1 bubbler | Most water filtration |
 10/14/18mm WPA (2-pack) |
£14.99 | ★ 5.0 (4) | Into your water pipe | Your own water pipe | 5cm | 2 adapters | 10, 14 or 18mm female joints |
 14mm Multi-Device Bubbler |
£14.99 | – | Needs a 14mm male WPA | Yes | About 120 x 30mm | 1 bubbler | Using one bubbler on several devices |
 Bubbler Stem |
£24.99 | ★ 4.6 (5) | Fits like a stem | Small, built in | Compact | 1 bubbler stem | Water cooling on the go |
 14mm Frosted WPA |
£9.99 | – | Into your water piece | Your own 14mm female piece | 75mm | 1 adapter | 14mm female bubblers |
| Compact Bubbler |
£14.99 | ★ 5.0 (1) | Fits like a stem | Small, removable lid | 100 x 26mm | 1 bubbler | Lowest-cost water option |
-
★★★★★Greg BitoVerified buyer
I absolutely love this for my POTV Lobo
I absolutely love this for my POTV Lobo. I was previously using a somewhat similar device sold by POTV which was OK but heavy drawers will always pull water into my mouth. This extra large bubbler eliminates that altogether. And on top of that, it is extremely easy to clean. So not only do I get a larger bubbler, and cooler vapor even with heavier draws, I get the bonus of being able to keep it clean without much effort. Love the way that the “mouthpiece” can be removed easily to empty and clean it. I “highly” recommend this for all Lobo enthusiasts!
Showing 1 reviews
What's the best bubbler for the POTV Lobo?
For the most cooling, this XL bubbler: it holds the most water and has a splash-control lid. For a smaller option, see the bubbler stem.
Will water get in my mouth?
Not if you fill it to just above the bubble holes. The lid controls splashes, and customers say it handles heavy draws without pulling water through.
Is the lid removable?
Yes. Lift it off to fill, empty and clean.
How do I clean it?
Take it off the device, empty and rinse with warm water. Soak in isopropyl alcohol now and then. See how to clean bubblers.
Does the XL bubbler fit both the Lobo and the ONE?
Yes. It's made for the Planet of the Vapes Lobo and ONE and fits the same way on both. See the Made for tab.
Does it fit the POTV XMAX V3 Pro?
Yes, with its POTV Accessory Attachment. See the Made for tab.
Complete your setup
Picked from real orders: these are the items customers most often buy with the XL Bubbler.
-
Often bought togetherWPA for POTV LOBO and POTV ONE, 10mm 14mm 18mm All In One WPA for Water Bubblers and Attachments£14.99
-
Often bought togetherHigh Air Flow Brass Screens for POTV LOBO, Perfect Fit, Washable and Reusable, Pack of 50£4.99
-
Often bought togetherGlass Dosing Capsules for the POTV LOBO & ONE - Scoop'n'Go - No Mess, Easy Switch and Clean (No Lid)£9.99
-
Often bought togetherDesktop Glass Stem, Tube and Accessories Organiser for DHVs, Flexi Silicone Interior£14.99
-
Often bought togetherSuper Cooling Glass Beads Stem for POTV LOBO and POTV ONE - Glass Ball High Surface Area Ultra Cooling AirFlow Path Accessory£14.99Sold out
