Water cooling, small size
A small water chamber cools the vapour without a big piece of glass.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Lid keeps water in
The removable lid with air holes stops water splashing up.
Quick to clean
Lift off the lid to rinse.
Add a little water
Lift the lid and add a little water, just above the holes. Don't overfill.
Fit it to your device
Pull your current glass stem straight up and out of the top of your LOBO or ONE, then push the bubbler straight down into the same opening until it sits snugly. No twisting needed.
Heat and draw gently
Keep the device upright and draw slowly so the water bubbles without splashing.
Empty and rinse
Take it off the device before you empty it. Rinse with warm water, and soak in isopropyl alcohol now and then.
What's in the box
- 1 x Compact water bubbler with removable lid
Your POTV device is not included.
| Material | Borosilicate glass |
|---|---|
| Length | About 100mm |
| Diameter | 26mm |
| Weight | 50g |
| Lid | Removable, with air holes |
Made for the Planet of the Vapes Lobo and ONE, and also listed for the POTV XMAX V3 Pro:
Planet of the Vapes (POTV)
- Lobo
- ONE
- POTV XMAX V3 Pro (fitted with its POTV Accessory Attachment)
The POTV XMAX V3 Pro takes POTV glass through its POTV Accessory Attachment. Using a standard XMAX V3 Pro or V4 Pro? See our XMAX V3 Pro and V4 Pro accessories, which need the black base.
If your device isn't on the list then please bear in mind the 12mm diameter.
| Water option | Price | Rating | How it connects | Water | Size | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing Compact Bubbler |
£14.99 | ★ 5.0 (1) | Fits like a stem | Small, removable lid | 100 x 26mm | 1 bubbler | Lowest-cost water option |
 10/14/18mm WPA (2-pack) |
£14.99 | ★ 5.0 (4) | Into your water pipe | Your own water pipe | 5cm | 2 adapters | 10, 14 or 18mm female joints |
 14mm Multi-Device Bubbler |
£14.99 | – | Needs a 14mm male WPA | Yes | About 120 x 30mm | 1 bubbler | Using one bubbler on several devices |
 Bubbler Stem |
£24.99 | ★ 4.6 (5) | Fits like a stem | Small, built in | Compact | 1 bubbler stem | Water cooling on the go |
| XL Bubbler |
£19.99 | ★ 5.0 (1) | Fits like a stem | Largest, built in | 150 x 35mm | 1 bubbler | Most water filtration |
 14mm Frosted WPA |
£9.99 | – | Into your water piece | Your own 14mm female piece | 75mm | 1 adapter | 14mm female bubblers |
-
★★★★★Anonymous
works well
received in good condition
Showing 1 reviews
Compact or XL bubbler?
The compact bubbler is smaller and cheaper. The XL bubbler holds more water for the most cooling. See the comparison.
Is a WPA included?
No. You get one compact bubbler. It fits your device directly, so you don't need a WPA.
How much water should I add?
A little, just above the holes. Overfilling can push water up.
How do I clean it?
Empty and rinse with warm water, with the lid off. See how to clean bubblers.
Does the Compact bubbler fit both the Lobo and the ONE?
Yes. It's made for the Planet of the Vapes Lobo and ONE and fits the same way on both. See the Made for tab.
Complete your setup
Picked from real orders: these are the items customers most often buy with the Compact Bubbler.
-
Often bought togetherWPA for POTV LOBO and POTV ONE, 10mm 14mm 18mm All In One WPA for Water Bubblers and Attachments£14.99
-
Often bought togetherHigh Air Flow Brass Screens for POTV LOBO, Perfect Fit, Washable and Reusable, Pack of 50£4.99
-
Often bought togetherGlass Dosing Capsules for the POTV LOBO & ONE - Scoop'n'Go - No Mess, Easy Switch and Clean (No Lid)£9.99
-
Often bought togetherDesktop Glass Stem, Tube and Accessories Organiser for DHVs, Flexi Silicone Interior£14.99
-
Often bought togetherSuper Cooling Glass Beads Stem for POTV LOBO and POTV ONE - Glass Ball High Surface Area Ultra Cooling AirFlow Path Accessory£14.99Sold out
