Cooling without the bulk
The beads cool the vapour inside a stem only about 12mm across.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
A spare included
Two stems, so you can keep one clean while the other is in use.
Easy to carry
Short and narrow, so it adds very little to a pocket setup.
Fit it to a cool tip
Push the stem onto your DynaVap tip while the tip is cool, until it sits firmly.
Heat as usual
Load the tip, heat the cap until it clicks, then draw.
Swap in the spare
When one stem needs a clean, switch to the second and soak the first.
Clean the beads
Soak the stem in isopropyl alcohol, rinse with warm water and dry it fully.
What's in the box
- 2 x slim glass stems with cooling beads
A DynaVap tip and device are not included.
| Material | Borosilicate glass |
|---|---|
| Length | About 75mm |
| Width | About 12mm |
| Cooling | Fixed glass beads |
| Pack | 2 stems |
| Made by | The Vapetrix (not an official DynaVap part) |
The Slim Beads Stem is made for:
DynaVap M series
- M 7
- M 7 XL
- Earlier M tips
Not for
- The UniDyn (its tip and stem are one piece)
Press it onto a standard DynaVap tip and it becomes the mouthpiece. See all our stems and accessories for DynaVap tips.
| Stem | Price | Cooling | Length | Widest point | Pack | Best for |
|---|---|---|---|---|---|---|
You're viewing Slim Beads Stem |
£14.99 | Glass beads, slim profile | About 75mm | 12mm | 2 stems | Pocket cooling with a spare |
 Large Beads Stem |
£24.99 | Large glass beads | About 120mm | 25mm | 2 stems | Long, cool draws without water |
 Spiral Stem |
£14.99 | Internal glass spiral | About 120mm | 25mm | 2 stems | Dry cooling without beads |
 Vibrant Beads Stem |
£19.99 | Coloured glass beads | About 75mm | 12mm | 1 stem | Colour and cooling in a slim stem |
 Steel Beads Stem |
£19.99 | Stainless steel balls, slim profile | About 75mm | 12mm | 2 stems | Fast cooling in a tough stem |
 Globe Stem |
£19.99 | Globe expansion chamber | About 75mm | 20mm | 2 stems | Simple cooling, nothing inside |
See all our stems and accessories for DynaVap tips.
-
Review of Ultra Beads Stem for POTV
★★★★★Eder QuirozVerified buyerLobo cooling stem
I really enjoyed this product. It has come in handy on several occasions.
![Customer photo from Eder Quiroz]()
-
Review of Long Glass Mouthpiece for VENTY
★★★★★Green GidroVerified buyerCool stuff
Loving my sessions with this glass mouthpiece! The beads inside make a real difference, the vapor is noticeably smoother and cooler. It looks great too. Next step: I’m definitely ordering the stainless steel bead version to test and compare!
![Customer photo from Green Gidro]()
-
Review of Ultra Beads Stem for POTV
★★★★★Rick EdwardsVerified buyerFantastic all that needs to be
Fantastic all that needs to be said
-
Review of Ultra Beads Stem for POTV
★★★★★AnonymousVerified buyer100% improvement
100% improvement. Way better than the stock stem.
-
Review of Cooling Beads Stem for Frolic
★★★★★AnonymousVerified buyerCool stuff
Cool stuff. I prefer direct connect with TM2 stem but it still a nice experience.
-
Review of Long Glass Mouthpiece for VENTY
★★★★★Peter ReidVerified buyerSO much smoother on your throat!
This mouthpiece is brilliant, almost as good as a bubbler without the small hassle of adding water etc. Other than my glass bubbler it’s the first glass mouthpiece I’ve used. Going to order a 2nd one to rotate them so they’re kept clean
-
Review of Cooling Beads Stem for Frolic
★★★★★AnonymousVerified buyerHappy purchaser
Great addition to my Frolic. Bought twice, one arrived broken but following the returns advice on here I got a replacement in the post next day with no quibble, much appreciated. It slots directly into the cooling chamber mouthpiece with no obvious vapour leakage. Both cooling and flavour feel enhanced. Cleans easy with some iso in a sandwich bag. Very happy.
-
Review of Vibrant Bead Stem for TinyMight
★★★★★Paul BradleyVerified buyerExcellent product
Excellent product, delivers every time
-
Review of Vibrant Beads Stem for POTV
★★★★★RipVerified buyerI love this stem
I love this stem, it cools the vapor. It’s great for one session, gets a little warm when you do two sessions in a row but way cooler than the POTV stem. Well worth the money.
-
Review of Vibrant Bead Stem for TinyMight
★★★★★Zachary FreemanVerified buyerI like this straight stem, it’s purty!
I like this straight stem, it’s purty! Maybe a version that’s shorter would be nice. What I want to know is exactly how many glass bb’s are in the tube?
-
Review of Vibrant Bead Stem for TinyMight
★★★★★Jack O NeilSmooth draws
Long slow pulls feel much smoother now, especially with the TM2 on demand mode.
-
Review of Long Glass Mouthpiece for VENTY
★★★★★GeorgiaPerfect fit
slides right in with the gasket, no issues.
Will it fit my DynaVap tip?
It is made for standard DynaVap tips: the M 7, M 7 XL and earlier M tips. Not the UniDyn, whose tip and stem are one piece. See the compatibility list.
How do I clean it?
Soak it in isopropyl alcohol, then rinse thoroughly with warm water and let it dry fully before use. See our guide to cleaning DynaVap glass.
Is this an official DynaVap part?
No. The Slim Beads Stem is made by The Vapetrix to fit DynaVap tips. It isn't made or sold by DynaVap.
How is this different from the Vibrant Beads Stem?
Same size and the same bead cooling, but this one comes as a pair and the Vibrant Beads Stem is a single stem with a coloured finish. See the comparison.
Complete your setup
Often bought with DynaVap parts in real orders, plus the screens and water options made for the same tips.
